Facebook-f Instagram Linkedin

Sheet metal bending

Sheet metal bending!

Most laser cut parts will be have bending as the next operation. For us the logical next step for the sheet metal deparment was bending so we brought Amada’s press break bending machine. We can handle bending parts up to 3000 mm.

Detailid

Equipment:

  • Amada HF50-12T

Materials:

  • Steel up to 8 mm,
  • Stainless steel up to 6 mm,
  • Aluminium up to 12 mm,

Bend length:​

  • 3000 mm.

Bending accuracy:

  • ± 0.5° 

Quotes

For quick quotes we need:

  • Cutting file which has only the cutting lines to the correct scale.
  • Cutting file format should be DXF, but we can handle DWG as well. 
  • If the part has to have marking or laser engraved lines, then these lines should be put into a layer named “Marking” and layer color sould be red (10) 
  • Technical drawings with dimensions and required tolerances in PDF.
  • If possible write the material and quantities into the cutting file filename           “Part-3mm-AISI304-150tk.dxf”
  • Parts with bending have to have a technical drawing where the details about the bends directions and angle are shown. 
  • Parts with bending if available should have a 3D model in STEP format.

Ask for more info or a quote

or write directly to laser [at] intar.ee

EAS_SF_RGB_ESTEestituleviku heaksEuroopa LiitEuroopaRegionaalarengu Fond